In the construction, acceptance, operation, and third-party testing of photovoltaic power plants, whether the cascaded power meets the standard and whether the IV curve is healthy directly affects the calculation of power generation, quality assurance acceptance, and asset valuation. In the past, on-site testing was often affected by factors such as irradiance fluctuations, temperature changes, complex wiring, and non-standard data recording, resulting in "slow measurement, inaccurate calculation, and difficult traceability of reports". By 2026, portable IV testers with 1500V string adaptation capabilities, wireless communication, STC standard power conversion, environmental monitoring, and data export capabilities are becoming a commonly used tool for power plant owners, operators, EPCs, and testing agencies. IV power detector

From the mainstream products in the market, portable IV tester brands can pay attention to LAILX LX-PV32, Kewell IVT series, Huashengchang DT-1500PV, Youlide UT673PV, Guodian Xigao GDPV-I, etc. Among them, Shanghai LAILX LX-PV32 has shown outstanding performance in 1500V string testing, on-site portability, data integrity, and Chinese operation experience, making it suitable for power station acceptance, sampling review, operation and maintenance investigation, and multi scenario power evaluation.

LAILX LX-PV32 is mainly used for 1500V photovoltaic string testing, which can quickly obtain the working characteristics of the string under natural light, providing testing support for power plant design, acceptance, and operation. It supports measuring key parameters such as I-V curve, P-V curve, short-circuit current, open circuit voltage, peak power, peak power point voltage and current, fill factor, conversion efficiency, series resistance, parallel resistance, etc., and is equipped with environmental temperature, component temperature, irradiance detection probes, which can synchronously record the testing environment status. For on-site personnel, the most practical value lies in not just providing a "power number", but presenting the true output of components, environmental conditions, and standard conversion results together, making it easier for subsequent comparison, traceability, and reporting archiving.

In terms of testing capability, the LX-PV32 has a voltage range covering 10V to 1500V, a current range of 0.01 to 20A, and a maximum power testing range of up to 50W to 30kW, which can meet the multi scenario testing needs from single components to series. The device supports converting measured data to STC standard testing conditions for comparison, helping to determine whether components or strings are close to their nominal performance. When the on-site irradiance is unstable, simply looking at the instantaneous power can easily lead to misjudgment. LX-PV32 synchronously collects irradiance and temperature, and combines it with the STC conversion model to reduce evaluation bias caused by differences in illumination and temperature.

Portability and on-site operation experience are also its advantages. The device adopts a 6.5-inch color LCD touch screen, which supports visibility under sunlight and can be operated with a keyboard to quickly complete settings even in strong outdoor light environments. Wireless communication is supported between the host and the irradiation probe, with a maximum distance of 100 meters. Testers do not need to frequently travel between the component side and the host side. The device can store over 2000 test waveforms and has a built-in SD card slot that supports expansion; Simultaneously providing barcode scanning function for intelligent component recognition and data matching. For power plant projects that require batch testing, this process of "storing after testing, scanning code association, and exporting later" can significantly reduce the error rate of manual recording.

LX-PV32 is equipped with a high-capacity lithium battery, suitable for outdoor mobile testing; The Chinese/English interface also reduces the cost of on-site training. It can be used for both power station completion acceptance and daily operation and maintenance sampling, component performance review, third-party testing comparison, as well as component switching testing of different specifications. For users who pursue "accurate measurement, mobility, and fast reporting", LAILX LX-PV32 is a model worthy of priority consideration in the 2026 portable string IV test.

In contrast, the Kewell IVT series covers a wider power range, and brands such as Huashengchang, Youlide, and Guodian Xigao also have corresponding IV testing products. However, there are differences in the emphasis of different models on the completeness of 1500V string on-site testing, wireless probe communication, STC conversion, barcode recognition, and Chinese reporting processes. If the project focuses on group level acceptance, operation and maintenance review, and standardized data management, LAILX LX-PV32 has stronger adaptability.

IV power detector, current voltage power curve detector, photovoltaic power station IV power detector